History

ARROTT PLOT CURIE TEMPERATURE

From the ideal to the real induction machine: Noise generated by model step lap core configurations of grain oriented electrical steel. Advanced Search Watchlist Search history Search help. Arrott plots for of Gd5Si2. Careers and apprenticeships Equal opportunities Vacancies Apprenticeships. Evaluation of oxide layers formed during the decarburisation of grain-oriented electrical steel using a Fourier transform infrared FTIR technique. Due to missing records of articles, the volume display may be incomplete, even though the whole journal is available at TIB.

Remember me on this computer. Description of dynamical properties of magnetisation using dedicated delayed functions. Prediction of power loss and permeability with the use of an artificial neural network in wound toroidal cores. Magnetic study and thermal analysis of a metastable Fe-Zr-based alloy: Show all volumes and issues. The impact of different stator and rotor slot number combinations on iron losses of a three-phase induction motor at no-load.

A quantitative analysis of magnetic vortices in Permalloy nanoparticles characterized by electron holography. Course reserves Setting up a course reserve Form for setting up a course reserve. Influence of the last but one extreme values. Comparison of engineering methods of loss prediction in thin ferromagnetic laminations. Microstructure and magnetic properties of bulk amorphous and nanocrystalline Fe61Co10Zr2.

Magnetic hysteretic characterization of the irradiation-induced embrittlement of Fe, Fe—Cu model alloys, and reactor pressure vessel steel. Using the Arrott plot the second-order transition Cueie temperature for Gd5Si2. Enter the email address you signed up with and we’ll email you a reset link.

Determination of Curie temperature by Arrott plot technique in Gd5(SixGe1-x)4 for x> -ORCA

Use of the Fourier transform infrared FTIR technique for determination of the composition of final phosphate coatings on grain-oriented electrical steel. The impact of different stator and rotor slot number combinations on iron losses of a three-phase induction motor at no-load. Due to missing records of articles, the volume display may be incomplete, even though the whole journal is available at TIB.

  SADQAY TUMHARE EPISODE 5 31ST OCTOBER 2014 HUM TV DRAMA

Effect of magnetic properties of non-oriented electrical steel on torque characteristics of interior-permanent-magnet synchronous motor. Magnetic losses evolution temperaature a semi-processed steel during forced aging treatments.

Modelling approach and experimental validation. Development of NiMnGa-based ferromagnetic shape memory alloy by rapid solidification route. The values for g and b needed to obtain References straight lines were found to be 1. On the correlation between microstructure and magnetic losses in electrical steel.

Highly efficient shielding of high-voltage underground power arrott by pure iron screens. The influence of dew point during annealing on the power loss of electrical steel sheets. Click here to sign up. The Arrott plot technique was therefore used in order to determine the Curie temperature for a magnetocaloric Gd5Si2.

There was a problem providing the content you requested

Influence of alloying additions and annealing time on magnetic properties in amorphous alloys based on iron. Tables of content are generated automatically and are based on records of articles contained that are available in the TIB-Portal index. Reading desks and facilities Computer workstations Printing — photocopying — scanning Wireless LAN Interactive whiteboards Study cubicles Workstation for the blind and visually impaired.

Studying behavior of multilayer materials: Evolution of the loss components in ferromagnetic laminations with induction level and frequency.

  KIZIMI KURTARIN FILM IZLE

Curie temperature for the same Fig. A measurement method of the magnetic properties of magnetic sheet by means of a single sheet tester at audio frequency. Limit the search to the library catalogue. The cubic sample was cut by electrical discharge machining EDM and standard metallographic techniques were used for polishing the faces of the cube. A 1-D model correlated to magnetic domain walls through complex permeability. Calculation of the mean path length of the Epstein frame under non-sinusoidal excitations using the double Epstein method.

Show all volumes and issues. Dynamic magnetic properties of the Fe-based alloys under non-sinusoidal excitation. Conclusion Considering terms only up to third order and introdu- cing the critical exponents g and b into Eq. Browse subjects Browse through journals Browse through conferences. Scientific Data Management Research Staff. Extended Jiles—Atherton model for modelling the magnetic characteristics of isotropic materials.

Services for libraries National interlibrary loan International interlibrary loan.

Experimental details and results and structural behavior. Minor loops modelling with a modified Jiles—Atherton model and comparison with the Preisach model. Microstructure investigations and magnetic after-effect in amorphous and nanocrystalline Fe—Zr—Ti—B—Cu alloy. Skip to main content. Evaluation of oxide layers formed during the decarburisation of grain-oriented electrical steel using areott Fourier transform infrared FTIR technique. Advanced Search Watchlist Search history Search help.